detuned reactive current compensation modules in rack-mounted design
multimod-F compensation modules in rack-mounted design are suitable for building compensation facilities in existing cabinets and are available for all cabinet systems on the market.
Highlights
- Power from 10 to 100 kvar
- Inductor factors 5.5, 7 or 8 % and 12.5 or 14 %
- Capacitor rated voltage with 440 V or 525 V
- For cabinet widths of 600 or 800 mm
- For cabinet depths of 400, 500 or 600 mm
Technical data
Device type
GH p = 5.5, 7 or 8 % | |
---|---|
Rated voltage | frequency: |
Un = 400 V | 50 Hz
|
Maximum permissible operating voltage: | Un = 400 V ± 10 % |
Maximum permissible operating current: | 1,2 x In permanently |
Switching element: | Capacitor contactors |
Control voltage: | Capacitor contactors |
>>> Control voltage transformer required for deviating operating voltage |
|
Switching delay: | 60 s |
Capacitors: |
Low-loss multicond-UHPC power capacitors, MTK technology
|
Capacitor rated voltage: |
Urated = 440 V
|
Discharge of capacitors: |
Discharge resistors t < 60 s, optional discharge inductors t < 3 s
|
Filter circuit inductors: | Linear filter circuit inductors to avoid resonances in networks with harmonics, integrated temperature monitoring |
Inductor factors: | p = 5.5, 7 or 8 % |
Module version: |
Module plates galvanized
|
Protection type: |
IP 00, the components used correspond to BGV-A2
|
Ambient temperatures:
|
+ 40 °C highest value, briefly + 35 °C in 24-hour average + 20 °C in annual average – 10 °C lowest value |
Fuse protection:
|
Group fusing with NH fuses and fuse bases (NH isolator on request) |
Download
Technical details, data sheet (1,42 MB)