multimess D6 - network measuring device

multimess D6 network measuring device

Three-phase network measuring device multimess D6

The multimess D6 network measuring device is ideal for reliable use in 3-wire and 4-wire networks. The device is equipped with a bus connection and an internal, non-volatile data memory in which long-term data is stored. The active and reactive energy is stored separately for energy consumption and recovery (4-quadrant measurement).
Apart from the internal and external tariff control for two tariffs, as well as various synchronization possibilities, the device provides a pulse output with programmable pulse
value. To display measured values, the device has a 6-digit LCD display as well as 6 status LEDs. The KBR eBUS lets you retrieve the energy consumption data of the energy
memory along with advanced measurement functions.

Highlight

  • Deployable in 3 or 4-wire networks
  • Current transformer connection for x / 1 A or x / 5 A (up to 9999 A)
  • Pulse output with freely programmable pulse value
  • 4-quadrant load profile memory for cumulated active and reactive power with a storage duration of 64 hours to 160 days
  • Easy-use sensor keys with acoustic feedback

Technical data

MEASURING
Measurement of positive active energy | negative active energy: P+ | P –
Measurement of positive reactive energy | negative reactive energy Q + | Q –
Tariffs: HT | NT
Deployable in 3-wire networks | 4-wire networks: Standard
DISPLAY
Display type: LCD
Class: 1
Tariffs: HT | NT
Possibility of certification | for internal billing purposes: – | Standard
MEMORY
Load profile memory Poverall | Qoverall (cumulated): Consumption and recovery | consumption and recovery
Daily power and reactive power (can be read out via bus): 1 year for energy consumption and energy recovery
Tarife: HT | NT
Event memory for monitoring tariff switch commands, mains failures, etc.: 1024 events with date and time
INPUTS
Voltage path: 3 x 5 V ... 100 V ... 120 V AC and 3 x 30 V ... 400 V ... 480 V AC
Current path: 3 x 0,01 A ... 1 A ... 1,2 A AC and 3 x 0,05 A ... 5 A ... 6 AC
Synchronization input | tariff switch input: Standard | Standard
OUTPUTS
Pulse output for active energy | reactive energy: Standard | Standard
Pulse value: Programmable
INTERFACE  

Serial:

RS485

POWER SUPPLY  
Operating voltage: 85 – 265 V AC / DC, 50 / 60 Hz
Power consumption:  
MECHANICAL DATA
Housing modules| size in mm (H x B x T ): 6 TE | 90 x 106 x 61
Protection type: IP 20
Mounting type: Wall mounting on DIN rail 7.5 mm deep, in accordance with DIN EN 50022,suitable for distribution board mountin
Weight: Approx. 650 g

multimess Energy measuring devices

MEASUREMENT MASTERMINDS!

When measurement alone is not enough.

Brochure multimess Energy measuring devices / Energy measuring technology