Highlights
- Ideal for use in installation distributions
- Compact designExpandable on a modular basis
| Input and aoutput configuration | ||
|---|---|---|
| Inputs | Outputs | Possible functions |
| - | 4x Relay | Relay switching |
Technical data
Expansion module multisio D2-4RO
| Displays | |
|---|---|
| Operation | Pushbutton for reset and scan mode |
| Display | 5 LEDs: 4x output status 1x operating status |
| Outputs | |
| Relay contact, floating (shared source), switching capacity 250 V AC, 2A |
4 |
| Interface | |
| KBR eBUS (RS485) | - |
| KBR module bus (RS485) | Standard |
| Baud rate | 38400 |
| Addressing | Automatic module bus addressing, scan mode can be activated on the device |
| Power supply | |
| Operating voltage | 24 V DC, supply via module bus |
| Power consumption | 1,3 VA |
| Mechanical data | |
| Housing modules and size in mm (H x W x D) |
2 TE (90 x 35 x 61) |
| Mounting type | Wall mounting on DIN rail 7.5 mm deep, in accordance with DIN EN 50022, suitable for distribution board mounting |
| Weight | approx. 80 g |
