System power supply 24 Volt
System power supply multisys D4-PS24V-1
Technical data
Power supply | |
---|---|
1. Power consumption | <26VA, 14W |
=~100-240V +-10% DC/50/60Hz | |
2. Power consumption | <46VA, 26W |
=~230V +-10% DC/50/60Hz | |
Hardware outputs | |
Voltage output | 1. 24V DC; 0,42A; 10W; short-circuit proof |
2. 24V DC; 0,84A; 20W; short-circuit proof | |
Electrical connection | |
Connection elements | RJ12 module sockets and screw-type terminals |
Input power supply | |
Max. permissible line cross section | 2,5 mm2 |
Fuse protection | Recommendation 1 AT < fuse < 4 AT |
Voltage output | |
Max. permissible line cross section | 1,5 mm2 |
Mechanical data
Top hat rail device | |
---|---|
Housing dimensions | 91 x 71 x 61 mm (H x W x D) |
Mounting type | Wall mounting on DIN rail 7.5 mm deep, in accordance with DIN EN 60715. Suitable for distribution board mounting |
Weight | approx. 150 g |
Ambient conditions | |
Standards | DIN EN 60721-3-3/A2: 1997-07; 3K5+3Z11; (IEC60721-3-3; 3K5+3Z11) |
Operating temperature | -5°C…+55°C |
Humidity | 5%…95%, non-condensing |
Storage temperature | -25°C…+70°C |
Standards and amendments | DIN EN 61010-1: August 2002 + B1 + B2 (IEC61010-1) |
Protection class | I, in accordance with DIN EN 61010-/August 2002 + B1 + B2 (IEC61010-1 |
Electrical safety | |
Overvoltage category | CAT II |
Degree of protection | IP 20 according to DIN EN 60529:1991 + A1:2000 (IEC60529) |
Electromagnetic compatibility | DIN EN 61000-6-2: 2006-03; (IEC 61000-6-2) DIN EN 61000-6-3: 2007-09; (IEC 61000-6-3) |
Downloads
Information / Technical Parameters - multisys D4-PS 5V and 24V DE/EN (940 KB)