multimod-F - reactive current compensation modules in plug-in design
multimod-F compensation modules in plug-in design are suitable for building compensation facilities in existing cabinets and are available for all cabinet systems on the market. As KBR quality products, the modules stand out through their long working life.
Highlights
- Power from 10 to 100 kvar
- Inductor factors 5.5, 7 or 8 % and 12.5 or 14 %
- Capacitor rated voltage with 440 V or 525 V
- For cabinet widths of 600 or 800 mm
- For cabinet depths of 400, 500 or 600 mm
Technical data
Device Type
|
SH p = 5.5, 7 or 8 % |
|
|---|---|
| Rated voltage | frequency: | Un = 400 V | 50 Hz |
| Maximum permissible operating voltage: | Un = 400 V ± 10 % |
| Maximum permissible operating current: |
1,3 x In permanently |
| Switching element: | Capacitor contactors |
| Control voltage:: |
Ucontrol = 230 V, 50 Hz |
|
>>> Control voltage transformer required for deviating operating voltage |
|
| Switching delay: | 60 s |
| Capacitors: |
Low-loss multicond-UHPC power capacitors, MTK technology |
| Capacitor rated voltage: |
Urated = 440 V (SH); Urated = 525 V (SB) |
| Discharge of capacitors: |
Discharge resistors t < 60 s, optional discharge inductors t < 3 s |
| Filter circuit inductors: | Linear filter circuit inductors to avoid resonances in networks with harmonics, integrated temperature monitoring |
| Inductor factors: |
p = 5.5, 7 oder 8 % (SH); p = 12.5 oder 14 % (SB) |
| Module version: |
Module plates galvanized |
|
Protection type: |
IP 00, the components used correspond to BGV-A2 |
|
Ambient temperatures: |
+ 40 °C highest value, briefly |
|
Fuse protection: |
Group fusing with NH fuses and fuse bases (NH isolator on request) |
Downloads
Technical details, data sheet (1,42 MB)
